|
Product Details:
|
| Product Name: | Automatic Five Feet 440V Weld Mesh Manufacturing Machine | Trademark: | Huayang |
|---|---|---|---|
| Applicable Industries: | Manufacturing Plant, Construction Works | Rated Power: | 56kva X 3 |
| Needed Power Supply: | Min.80kva | Mesh Opening Size: | 1/4''-4'' |
| Aperture/pitch: | 1", 2", 3", 4" 25, 50, 75, 100mm | Cooling System: | Water/Air Cooling |
| Wire Materials: | GI/SS/BI Wire | Production Capacity: | 30-100rolls/8hours |
| High Light: | automatic welded wire mesh making machine,440v welded wire mesh making machine,five feet weld mesh manufacturing machine |
||
1. Product description
Automatic Five Feet 440V Weld Mesh Manufacturing Machine is used for making wire mesh. Servo motor galvanized roll mesh welding machine is used for making wire mesh. The drawing mode: servo motor reciprocating drawing, pneumatic tightening cross wire, to ensure the precise position of the drawing mesh. Each of the welding transformer is 160KVA. And the welding transformer is water cooling. And the welding electrodes are also water cooling.
2. Technical parameter
| Model | Mesh width | Minimum mesh size (inch) | Wire diameter(mm) | Welding speed (rows/min) | Roll mesh length (m) | Other available mesh size (inch) |
| R- DHW | 6 feet | 1/2x1/2 | 0.45-0.85 | 90-120 | 130 | 1/2x1, 1x1/2, 1x1, 2x2 |
| R- DHW | 6 feet | 1/2x1/2 | 0.6-1.3 | 90-120 | 110 | 1/2x1, 1x1/2, 1x1, 2x2 |
| R- DHW | 6 feet | 1/2x1/2 | 0.8-1.6 | 80-90 | 100 | 1/2x1, 1x1/2, 1x1, 2x2 |
| R- DHW | 6 feet | 1x1 | 0.45-0.85 | 90-120 | 130 | 1x2, 2x1, 2x2, 2x4 |
| R- DHW | 6 feet | 1x1 | 0.6-1.3 | 90-110 | 110 | 1x2, 2x1, 2x2, 2x4 |
| R- DHW | 6 feet | 1x1 | 0.8-1.6 |
90-110 |
100 | 1x2, 2x1, 2x2, 2x4 |
| R- DHW | 6 feet | 1x1 | 1.4-2.6 | 80-90 | 80 | 1x2, 2x1, 2x2, 2x4 |
3. Application area
Automatic Five Feet 440V Weld Mesh Manufacturing Machine is widely used in Steel welded wire mesh production for concrete reinforcement, panels in construction and security wire mesh fences, in a small area and noiseless.
4. Advantages
a. High stability ,low noise, automatically straightening, automatically feeding wire .
b. The line wire is fed from coils; the cross wire is pre-cut, fed from hopper driven by step motor.
c. Raw materials can be galvanized wire, black wire and stainless steel wire.
Contact Person: admin
Tel: +8618600627368
